Genesis Windshield Replacement Colonial Heights VA

🪟

Glass Types Used in Genesis

Acoustic Laminated

Standard on most Genesis models for noise reduction and cabin comfort.

Rain Sensor Ready

GV80, GV70, G70 from ~2021+ feature rain-sensing auto-wipers.

UV Absorbing

Genesis uses UV-blocking laminate — prevents dashboard fading.

Multi-Camera Support

Genesis Smart Sense ADAS requires calibration of forward camera and surround cameras.

📷

ADAS & Camera Systems

Forward Camera (FCW)

Pre-collision system camera mounted behind windshield on most models from 2020+. Calibration required after replacement — included.

Lane Keep Assist

Standard on GV80, GV70, G70 from ~2021. Camera calibration required post-install.

Surround View Monitor

360-degree camera on higher trims — all cameras must be recalibrated after glass replacement.

⚠️ Common Genesis Windshield Considerations

!Genesis rain sensor glass requires specific part numbers by trim level — incorrect parts cause wiper malfunction.
!Acoustic glass on newer models is not interchangeable with non-acoustic versions.
!Genesis ADAS recalibration must use OEM-approved procedures for best results.

ADAS Calibration FAQ for Genesis

Clear answers about when calibration applies and how we verify the correct procedure for your vehicle.

When is ADAS calibration required after a Genesis windshield replacement?

Calibration depends on Genesis's service information and the exact year, make, model, and VIN. It may be required when a forward camera or related sensor is disturbed by glass replacement; we verify the requirement before work and do not add calibration when the manufacturer does not call for it.

How is ADAS calibration performed and documented?

Depending on the vehicle, calibration uses static target-board measurements, a dynamic road procedure, or both. We follow the manufacturer's sequence with the required targets and diagnostic software, then document the procedure and results for your records.

Why do manufacturer-specific ADAS systems and procedures matter?

Glass fit, camera geometry, target placement, diagnostic software, and calibration sequence vary by manufacturer and model. Following the correct manufacturer procedure helps confirm the camera is aligned and the safety system is ready to operate as designed.

Request a quote and we’ll verify your VIN, year, make, and model before any work begins.

Request a Quote →